Product Info
Features
- Kick your speed demon into high gear and unleash huge horsepower, tremendous torque, and awe-inspiring acceleration with the Dynatech SuperMAXX Exhaust System
- Dynatech custom builds and dyno tunes your SuperMAXX Exhaust System for your year, make and model
- Comes complete with everything you need in a muffler-forward system: track-inspired headers, mandrel-bent piping, lightning-fast catalytic converters, and premium hardware (mufflers not included)
- Entirely built from superior T-304 stainless steel for maximum durability
- The stainless steel headers in your SuperMAXX Exhaust System are mandrel bent for maximum exhaust flow
- For a snug fit on your motor, the headers boast laser cut flanges, flat ground welds, and gussets (on select models)
- The porting, tube exit angles, and tube length of your SuperMAXX headers are all carefully deigned to pump out the most power
- Your SuperMAXX Exhaust System features Dynatech’s unrestricted catalytic converter that can boost exhaust flow by up to 106%
- The low-profile Aero-flow collectors are CAD designed and use a 4-bolt connection for a leak-free fit
- Many SuperMAXX Exhaust Systems use a NASCAR style X-pipe crossover for greatly reduced backpressure
- Your SuperMAXX Exhaust System uses jig-located mounting brackets and flanges for a seamless fit
- Properly bunged for attaching your factory sensors
- All mounting hardware is included with your SuperMAXX Exhaust System, including sturdy hangers and triple-layer steel gaskets
- Custom engineered for a direct bolt-on installation
Description
Can an exhaust system deliver enough power to literally knock your socks off? Let’s just put it this way: when you equip your mean machine with Dynatech’s SuperMAXX Exhaust System, you’d better lace up your driving shoes tight. Each system is custom engineered and dyno proven to unleash massive wallops of real, usable, seat-of-the-pants horsepower and torque across the power band.
Your SuperMAXX Exhaust System doesn’t just push the envelope of street performance—it air mails it to Timbuktu. The potent combination of the SuperMAXX’s long-tube headers and the high-flow catalytic converters boosts exhaust flow by up to 106%! Select systems even come with a NASCAR style X-pipe. Plus, the whole system is built to last from T-304 stainless steel.
No chop jobs required—just unbolt your old exhaust manifolds and cats, then pop your shiny new SuperMAXX in its place. Your stock mufflers stay put, and you get triple-layer steel gaskets, clamps and mounting hardware.
Notes
Manufacturer Info
Dynatech continues to be the exhaust leader in all forms of racing and high performance applications. Advances in racing, engineering, and design have auto makers bringing a whole new breed of cars and trucks to the streets. This same excitement and new wave technology is apparent at Dynatech as you view the pages of our latest catalog. We continue to be focused on new products and award winning designs. The same race winning technology that you expect from Dynatech is now available in our everexpanding High-Performance, Truck, and SUV headers and exhaust systems.
Dynatech Delivers:
- Award Winning Engineering & Design
- New Wave Technology & Manufacturing
- Unsurpassed Quality & Workmanship
Design and Engineering
All-new virtual reality design system allows engineers to design exhaust systems in virtual space that will meet all necessary design criteria. Key interference and mounting points are captured and then transferred into a engineering computer station. Tube routings, lengths, and diameters can all be manipulated for proper fit and function. This systems cuts design time by 90% and produces a much more efficient and powerful design.
Technology and Manufacturing
Automated production machines, such as robotic welding, CNC bending, machining, and laser trimming equipment, give us the ability to produce the highest quality, most consistent competition exhaust products in the industry. Utilizing over 95,000 square feet, Dynatech’s production capabilities are second to none. From all out competition racing headers to high volume street/performance exhaust systems, our production capabilities can satisfy your needs.
Quality and Workmanship
At Dynatech we strive for 100% perfection of all the products we produce. Every product we manufacture goes through proven assembly steps and procedures to provide you with a product that we stake our reputation on. We have instituted numerous fitment and quality control inspections. All street/performance systems are 100% tested to be leak-free. Dynatech provides the finest quality exhaust products in the industry.
The above information has been provided by the Manufacturer and AutoAnything cannot guarantee the accuracy thereof or endorse the opinions expressed.
Reviews
 |
SuperMAXX is great for towing. |
| Posted on 04/15/2008 by Chris H. (San Antonio,TX) |
|
| “I installed a SuperMAXX system on my Tahoe a few months ago. It was very easy to install with basic hand tools. The exhaust looks beautiful and fits great. I had one issue with the passenger side header barely touching the frame. I had to give it a little dimple so it wouldn’t rattle. Other than that the installation went smoothly. I waited to write a review until I took it out on a trip. First the exhaust sounds great. It has a nice throaty sound that does not drone in the cab. Second I noticed a nice increase in power. The truck did not downshift climing several hills that it used to downshift on. Finally I noticed an increase in MPG. It was a small difference, but hey, with gas being $4 a gallon any improvement is GREAT!!” |
|
|
Totally satisfied, installed on a 01 Camaro SS SLP |
| Posted on 04/11/2008 by Naticia F. - 2001 Chevy Camaro (Shippensburg,PA) |
|
| “I can’t say enough about the whole experience. No issues installing this, everything slid right where it needed to be. My car sounds awesome. None of my friends have this one so everyone was really curious to hear it on a car, they were all impressed.” |
|
|
Dynatech SuperMAXX for 03 Silverado SS |
| Posted on 03/20/2008 by Brad T. - 2003 Chevy Silverado (Cloquet,MN) |
|
| “Excellent fit and finish!!! Took me about 5 hours to do complete install. Rear-most header bolt on driver side was the only time consuming hang-up. I forgot to put my dipstick tube back in place before firing it up the first time, so I covered the passenger side of the engine compartment with oil spatter, I recommend not making that same mistake… They look great, sound better!! Already had a Gibson cat-back system I previously installed, they make a great combination!!!” |
|
|
Excellent Product - System |
| Posted on 02/13/2008 by James J. - 2004 Chevy Silverado (Mesa,AZ) |
|
| “Opted to install myself - took two days (I’m 65!). Fit & finish were as advertised - no cutting or modifications - mated up perfectly with existing Borla catback system - no leaks. Increase in performance very noticable - and what an exhaust note! Installed on an ‘04 Silverado 5.3L with a Hypertech program & K&N intake. James Mesa, AZ” |
|
|
Awesome |
| Posted on 11/06/2007 by William R. - 2002 Chevy Silverado (Glendale,AZ) |
|
| “The system sounds and performs great. Directions easy to follow. Fits in easy with Flowmaster 40 muffler system. Did not come with steering column bolt as directions stated, but I think I would have just shaved stock steering column bolt anyway instead of replacing with new bolt. All other parts were there and in great condition.” |
|
|
I Love It |
| Posted on 10/16/2007 by Chris B. - 2005 Dodge Ram (West Islip,NY) |
|
| “Sounds mean, gave a nice power boost. Defenitely worth the money” |
|
 |
dynatech install 2006 chev. 6.0 eng. |
| Posted on 09/28/2007 by John G. - 2006 Chevy Silverado (Robbinsville,NC) |
|
| “had to modification on both down pipes they were to long.also the extentison wire for o2 sensor was wrong had the wrong end to match my truck. hard to feel any power change.i will have the computer tuned to see if its helps.so for to expenses for the gain.” |
|
|
Great system! |
| Posted on 09/10/2007 by Brandon A. (Concord,CA) |
|
| “I love these headers! It was a great package that came to my doorstep, included everything I needed for installation. It also included a nice installation guide with pictures! Couldn’t be happier with this system, it sounds great! Autoanything was fast to ship it to me also, so that was a big plus.” |
|
|
ease of installation |
| Posted on 07/11/2007 by Roger R. (Newport News,VA) |
|
| “the system was very easy to install even working on jack stands as i did……took 4-5 hrs to install ( iam 60+ yrs old)….the problems i encountered, not enough room to use an torque wrench on some of the exhaust header bolts…..but were accessable with open end wrench……reistalling the muffler pipe was a bit of trouble but with lubing the rubber hangers with plenty of lube helped….over all the kit was enjoyable to install and an noticable increase in performance is noticeable…….excellexnt system….would recommend dynatech headers to others looking for an tuned pipe header system … tks” |
|
|
SuperMAXX Headers and Exhaust System |
| Posted on 04/14/2007 by Rajesh P. (Raleigh,NC) |
|
| “After some research I decided to purchase the Dynatech SuperMAXX Headers and Exhaust System to install on my 04 Chevy Silverado (1500 5.3L V8). Before I say anything about the system, I would like to congratulate AutoAnything for its prompt delivery and having the lowest price available and the free shipping was a definite plus. The Dynatech SuperMAXX Headers and Exhaust System is fairly expensive but they are absolutely beautiful and well constructed. I was actually quite surprised at the quality, for a bolt on system it was comparable to custom made headers that you would find on racing vehicles. The package arrived with all of the parts, the stainless steel headers, Y-Pipe, for a straight bolt on along with detailed instructions. The system came with very detailed instructions on the installation process and I would suggest that if one is not mechanically inclined they should have it professionally done as Dynatech suggested. The headers themselves fit perfectly, I have absolutely no complaints, however, connecting the Y-pipe to my Corsa exhaust was slightly difficult but not impossible. I did have to eventually take out the exhaust and do some cutting to get the desired fit. This was probably the most difficult and frustrating part of the installation. I think given the quality of the SuperMAXX headers, there is room for improvement with the exhaust system. With that said, I am extremely pleased with Dynatech SuperMAXX Headers and Exhaust System and you can definitely feel the difference.” |
|
Meyers
